вентилятор jasen, jason

вентилятор jasen, jason

Small compact structure, able to operate at very low noise under high air pressure.
Synthetic plastic centrifugal impeller, high efficient airfoil blade design.
External rotor motor ensures excellent heat dissipation effect, and increases their endurance to high temperature.
Applicable to run under bad air medium.
One-time molding Integral impeller increases the actual service life.
Kinds of cooling types are realised by speeds controller set.
Centrifugal fan of IP55 protection class is available.
Wide choices for accessories: finger guard, inlet ring, capacitor, connection box, and so on.
The fans have approvals of TUV, CSA, CE,CCC and RoHS.

C4E-355.60

C4E-355.60

Motor Cage type capacitor structure external rotor motor Impeller Impact molding of aluminium alloy plate Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C4E-355.60

Read More

C4E-355.95

C4E-355.95

Motor Cage type capacitor structure external rotor motor Impeller Impact molding of aluminium alloy plate Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C4E-355.95

Read More

C4E-315.101

C4E-315.101

Motor Cage type capacitor structure external rotor motor Impeller Impact molding of aluminium alloy plate Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V ,1 min at 0.5mA, 50/60 Hz Insulation Grade design according to IEC61858 … Continue reading C4E-315.101

Read More

C2E-250.56C

C2E-250.56C

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Voltage endurance AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-250.56C

Read More

C2E-250.48D

C2E-250.48D

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Voltage endurance AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-250.48D

Read More

C2E-225.63DS

C2E-225.63DS

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-225.63DS

Read More

The fans have approvals of TUV, CSA, CE,CCC and RoHS.

C2E-225.63C

C2E-225.63C

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-225.63C

Read More

C2E-220.44DS

C2E-220.44DS

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-220.44DS

Read More

C2E-220.44TS

C2E-220.44TS

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-220.44TS

Read More

C2E-220.44B

C2E-220.44B

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-220.44B

Read More

C2E-190.45A

C2E-190.45A

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-190.45A

Read More

C2E-175.42TS

C2E-175.42TS

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-175.42TS

Read More

The fans have approvals of TUV, CSA, CE,CCC and RoHS.

C2E-175.42B

C2E-175.42B

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-175.42B

Read More

C2E-175.45C

C2E-175.45C

Motor Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-175.45C

Read More

C2E-133.41A

C2E-133.41A

Motor Shaded pole/Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -25℃ ~ +65℃ (temperature) 0% ~ 95% (humidity) Protection Impedance protected / Automatic recovery thermal protection Withstand Voltage AC 1,800V ,1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-133.41A

Read More

C2E-133.41CS

C2E-133.41CS

Motor Shaded pole/Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -25℃ ~ +65℃ (temperature) 0% ~ 95% (humidity) Protection Impedance protected / Automatic recovery thermal protection Withstand Voltage AC 1,800V ,1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-133.41CS

Read More

C2E-133.41C

C2E-133.41C

Motor Shaded pole/Cage type capacitor structure external rotor motor Impeller Black PA nylon one-time injection moulding Allowable environment temperature and humidity range:(under unconcretionary condition) -25℃ ~ +65℃ (temperature) 0% ~ 95% (humidity) Protection Impedance protected / Automatic recovery thermal protection Withstand Voltage AC 1,800V ,1 min at 0.5mA, 50/60 Hz Insulation Grade design according to … Continue reading C2E-133.41C

Read More

The fans have approvals of TUV, CSA, CE,CCC and RoHS.

FJ28082MABTS

FJ28082MABTS

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +75℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ28082MABTS

Read More

FJ28082MAB

FJ28082MAB

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +75℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ28082MAB

Read More

FJ22082MABTS

FJ22082MABTS

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +80℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ22082MABTS

Read More

FJ22082MAB

FJ22082MAB

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +80℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ22082MAB

Read More

FJ16052MABD

FJ16052MABD

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +65℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ16052MABD

Read More

FJ14532MAB

FJ14532MAB

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +75℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ14532MAB

Read More

Compact configuration can save much installation space.
Flange frame ensures easy installation.
Various kinds of design provides you choices for different voltages and speeds.
Overload and locked rotor protection.
Different speeds and airflow is available by circuit design modulation.
IP55 grade fan is available.
Wide choice for fan accessories: different sizes of metal finger guards, plastic finger guards, filter pad, air filter, connection wires and so on.
The fans have approvals of TUV, CSA, CE,CCC and RoHS.

FJ12032MAB

FJ12032MAB

Frame Aluminum die-casting, surface is finished by anti-corrosion treatment with primary color or black electrophoresis anti-corrosion treatment Impeller Metal impellers are welded to motor rotor, and surface is finished by black electrophoresis anti-corrosion treatment Operation Temperature/Humidity Temperature -30℃ ~ +65℃ Humidity 0% ~ 95% Protection Motor Internal with automatic recovery thermal protector Withstand Voltage AC … Continue reading FJ12032MAB

Read Mor

The fans have approvals of TUV, CSA, CE,CCC and RoHS.

FJ23062AB

FJ23062AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 Operation Temperature/Humidity Range: (under unconcretionary state) -40℃ ~ +65℃ (temperature), 0% ~ 95% (himidity) Protection Automatic recovery thermal protection Withstand Voltage AC 1,500V , 1 min at 0.5mA, 50/60 Hz Insulation System design according to IEC61858 Grade B, Protection … Continue reading FJ23062AB

Read More

FJ18062AB

FJ18062AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 Operation Temperature/Humidity Range: (under unconcretionary state) -20℃ ~ +55℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,500V , 1 min at 0.5mA, 50/60 Hz Insulation System Design according to IEC61858 Grade B, Protection Grade IP34 … Continue reading FJ18062AB

Read More

FJ17052AB

FJ17052AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 (5 Blades/7 Blades) Operation Temperature/Humidity Range: (under unconcretionary state) -40℃ ~ +65℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation System Design according to IEC61858 Grade B, … Continue reading FJ17052AB

Read More

FJ15052AB

FJ15052AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 (5 Blades/7 Blades) Operation Temperature/Humidity Range: (under unconcretionary state) -40℃ ~ +65℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation System Design according to IEC61858 Grade B, … Continue reading FJ15052AB

Read More

FJ12032AB

FJ12032AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 Operation Temperature/Humidity Range: (under unconcretionary state) -30℃ ~ +60℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,800V , 1 min at 0.5mA, 50/60 Hz Insulation System design according to IEC61858 Grade B, Protection Grade IP34 … Continue reading FJ12032AB

Read More

FJ9022AB

FJ9022AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 Operation Temperature/Humidity Range: (under unconcretionary state) -40℃ ~ +65℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,500V , 1 min at 0.5mA, 50/60 Hz Insulation System Design according to IEC61858 Grade B, Protection Grade IP34 … Continue reading FJ9022AB

Read More

The fans have approvals of TUV, CSA, CE,CCC and RoHS.

FJ8022AB

FJ8022AB

Frame Aluminium alloy die-casting, surfaces is finished by black anti-corrosion treatment. Impeller Black plastic PBT UL94V-0 Operation Temperature/Humidity Range: (under unconcretionary state) -30℃ ~ +60℃ (temperature), 0% ~ 95% (himidity) Protection Impedance Protected Withstand Voltage AC 1,500V , 1 min at 0.5mA, 50/60 Hz Insulation System Design according to IEC61858 Grade B, Protection Grade IP34 … Continue reading FJ8022AB

Read More

The fans have approvals of CSA, CE,CCC and RoHS.

C4E-450.FG.V

C4E-450.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -30℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) … Continue reading C4E-450.FG.V

Read More

C4E-400.FG.V

C4E-400.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -30℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) … Continue reading C4E-400.FG.V

Read More

C4E-350.FG.V

C4E-350.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -30℃ ~ +70℃ (temperature) 0% ~ 95% (humidity) … Continue reading C4E-350.FG.V

Read More

C4E-300.FG.V

C4E-300.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -30℃ ~ +75℃ (temperature) 0% ~ 95% (humidity) … Continue reading C4E-300.FG.V

Read More

FJ2E-250.A

FJ2E-250.A

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +75℃ (temperature) 0% ~ 95% (humidity) … Continue reading FJ2E-250.A

Read More

C2E-250.FG.V

C2E-250.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +75℃ (temperature) 0% ~ 95% (humidity) … Continue reading C2E-250.FG.V

Read More

Compact configuration can save maximum space for users.
External rotor capacitor type motor can be designed with 2 poles, 4 poles, 6 poles or 8 poles, which can meet the needs of different fields.
Various kinds of models, sizes and air performance for selection.
Different speeds and air flow are available by circuit design modulation, which generates different voltages.
With low noise and remarkable efficiency, it is suitable for refrigeration unit.
The integral combination of motor and impeller realizes double-faced balancing.
IP55 grade fan is available.
Wide choice for fan accessories: protection guard, basket-type guard, capacitor, connection box, connecting wire and so on.
The fans have approvals of CSA, CE,CCC and RoHS.

FJ2E-200.TSV

FJ2E-200.TSV

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) … Continue reading FJ2E-200.TSV

Read More

FJ2E-200.A

FJ2E-200.A

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) … Continue reading FJ2E-200.A

Read More

C2E-200.FG.V

C2E-200.FG.V

Motor Cage type capacitor start external rotor motor Impeller Pressed from metal armor plate, impellers are welded to motor rotor and its surface is black and anti-corrosion Fixed Guard Steel wire is finished with black paint and anti-corrosion treatment Allowable environment temperature and humidity range:(under unconcretionary condition) -40℃ ~ +80℃ (temperature) 0% ~ 95% (humidity) … Continue reading C2E-200.FG.V

Read More

Maintenance: usually this kind of equipment does not need any maintenance. But after using in the polluted environment, non-woven fiber filter pad needs to be cleaned (internal).After break up, you can use compressed air to blow the filter, or clean it with water (the highest water temperature should be less than 40 degrees Celsius).

FJK220PB-230

FJK220PB-230

Characteristics: The fan is made of metal support, built-in centrifugal fan and ABS plastic cover. It is widely applied to electrical products and cabinets. Centrifugal top ventilator can exhaust heat load with high efficiency. It can work under electromagnetic environment, meanwhile, it won’t interfere the system or equipment where it installed. Running temperature/humidity: (unconcretionary) Temperature: … Continue reading FJK220PB-230

Read More

FJK6626D.M

FJK6626D.M

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6626D.M

Read More

FJK6626M

FJK6626M

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6626M

Read More

FJK6625M

FJK6625M

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6625M

Read More

FJK6625PB

FJK6625PB

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6625PB

Read More

FJK6623PB

FJK6623PB

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6623PB

Read More

FJK series ventilation system consists of grille, filter pad and fan.
Frame is made up of heatproof and antiflaming fire retardant ABS plastic, the fire resistance conforms to UL – 94 standard.
High efficient external rotor axial fan ensures optimal filtering air flow rate.
Non-woven fiber filter pad filtering efficiency up to 70% or more.
The augment of sealing ring makes it IP55 protection grade.
The user can simply reverse the fan installation to achieve suck or blow airflow.
Maintenance: usually this kind of equipment does not need any maintenance. But after using in the polluted environment, non-woven fiber filter pad needs to be cleaned (internal).After break up, you can use compressed air to blow the filter, or clean it with water (the highest water temperature should be less than 40 degrees Celsius).

FJK6622PB

FJK6622PB

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6622PB

Read More

FJK6621PB

FJK6621PB

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6621PB

Read More

FJK6620PB

FJK6620PB

Characteristics: It comprises of a axial fan, a protective housing on the front and rear surfaces and filter designed to retain dust particles. The filters that equip the fans must be cleaned and replaced regularly. This filter can be replaced during operation without risk of touch with the rotating part. Material of filter pad: 100g/ … Continue reading FJK6620PB

Read More