Блок питания mean well mw 12vdc 24vdc

Минск, Обновлено: 17 декабря 2024г., 00:00
  Enclosed Switching Power Supply
G3 Series
Wattage 15W~150W
Features • Miniature size, non-PFC
• High reliability, 5G vibration, 70℃ operation
• 300VAC input surge, all using 105℃ capacitors
• Suitable for critical applications
• 2 outputs are isolated for RID series
Model No.
Data Link
 Single RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
Dual
 RD-35 / RD-50 / RD-65 / RD-85 / RD-125
RID-50 / RID-65 / RID-85 / RID-125
Triple RT-50 / RT-65 / RT-85 / RT-125
Quad RQ-50 / RQ-65 / RQ-85 / RQ-125
NE Series
Wattage 15W~350W
Features • Economical non-PFC models
• Miniature size with complete protections
• Economical models with complete safety certificates
Model No.
Data Link		 Single NES-15 / NES-25 / NES-35 / NES-50 / NES-75 / NES-100 /
NES-150 / NES-200 / NES-350
Dual NED-35 / NED-50 / NED-75 / NED-100
Triple NET-35 / NET-50 / NET-75
LRS Series
Wattage 35W~350W
Features • Non-PFC, complete protections
• Most economical models with safety certificates
• No load power consumption: 0.2W~0.75W
• Ultra compact and 1U low profile
• Operating altitude up to 5000 meters
• Compliance to IEC/EN60335-1(PD3) and IEC/EN61558-1,-2-16 for household appliances (35~150W)
Model No.
Data Link

LRS-35 / LRS-50 / LRS-75 / LRS-100 / LRS-150F /  LRS-150 /
LRS-200 / LRS-350
SE Series
Wattage 100W~1500W
Features • Non-PFC, complete protections
• Economical medium to high power models with safety
certificate
Model No.
Data Link		 SE-100 / SE-200 / SE-350 / SE-450 / SE-600 / SE-1000 / SE-1500
PFC Series
Wattage 75W~750W
Features

• Built-in active PFC function
• Full range input, complete functions
Model No.
Data Link
 Single SP-75 / SP-100 / SP-150 / SP-200 / SP-240 / SP-320 / SP-480 /
SP-750 / PSP-600
Triple TP-75 / TP-100 / TP-150
Quad QP-100 / QP-150 / QP-200 / QP-320 / QP-375
Moving Sign
Wattage 150W~400W
Features • Built-in active PFC function (HSP/HDP series)
• Output voltage:
2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V for HSP series
4.2V, 5V for HSN series
2.8V, 4.2V, 5V for NEL series
24V, 36V, 48V for ERP-350 series
12V, 24V, 48V for ERPF-400 series
2.8V / 3.8V for HDP series
• Suitable for high efficiency moving sign applications
• Conformal coating (HSP/HDP/NEL/HSN series)
• Semi-potted and design against rain splash (ERP-350)
Model No.
Data Link		 Single HSP-150 / HSP-200 / HSP-250 / HSP-300
HSN-200 / HSN-300
NEL-200 / NEL-300 / NEL-400
ERP-350 /  ERPF-400
Dual HDP-190 / HDP-240
SPV Series
Wattage 150W~1500W
Features • Output voltage programmable from 20~110%
Model No.
Data Link		 SPV-150 / SPV-300 / SPV-1500
U-Bracket
Wattage 150W~500W
Features • 1U low profile
• Built-in active PFC function
• Fanless design
Model No.
Data Link		 USP-150 / USP-225 / USP-350 / USP-500
RSP Series
Wattage 75W~3000W
Features • Low profile power supply with active PFC function:
1U: 75W ~ 2000W, 2U: 2400W / 3000W
• Output voltage programmable:
750W/1000W/1500W/1600W/2000W/2400W/3000W
• Constant current level programmable: 750W/1600W
• Built-in parallel (active current sharing) function:
1000W ~ 3000W
Model No.
Data Link		 RSP-75 / RSP-100 / RSP-150 / RSP-200 / RSP-320 / RSP-500 /
RSP-750 / RSP-1000 / RSP-1500 / RSP-1600 / RSP-2000 /
RSP-2400 / RSP-3000

 
RST Series
Wattage 5000W~10000W
Features • Single output power supply with 5000W / 10000W high wattage
• 3 phase input:3-wire / 196~305VAC or 4-wire / Y340~530VAC
• Built-in active PFC function
• High efficiency up to 91%
• 20000W with built-in parallel (active current sharing) function
• Output voltage and current programmable
• Built-in auxiliary power
• 5 years warranty
Model No.
Data Link		 RST-5000 / RST-10000
G5 Series
Wattage 75W~600W
Features • Built-in active PFC function
• High efficiency, no load power consumption <0.5W~0.75W
• 5 years warranty
Model No.
Data Link		 HRP-75 / HRP-100 / HRP-150 / HRPG-150 / HRP-200 /
HRPG-200 / HRP-300 / HRPG-300 / HRP-450 / HRPG-450 /
HRP-600 / HRPG-600
MSP Series
Wattage 100W~600W
Features • Medical enclosed type, built-in active PFC
• Medical safety approved (MOOP level)
• High efficiency, no load power consumption<0.5W~0.8W
• 5 years warranty
Model No.
Data Link		 MSP-100 / MSP-200 / MSP-300 / MSP-450 / MSP-600
HEP Series
Wattage 100W~600W
Features • Universal AC input / Full range 90~305VAC with PFC function
• High efficiency, fanless design with extremely low noise
(96% efficiency for HEP-600)
• Wide working temperature range -55~+70℃
under free air convection cooling
• Rugged metal case with IP65 design (IP68 option available),
withstand 10G vibration
• High operating altitude up to 5000 meters
• Suitable for high/low temperature, high dust, high moisture,
high vibration, high salt outdoor or harsh environment
• 6 years warranty
Model No.
Data Link		 HEP-100  / HEP-150  / HEP-185  / HEP-240 / HEP-320 / HEP-600
   LED      LED / LED Driver TOP
OWA Series

Wattage 60W~120W
Features

• IP67 design for power body
• 90~264VAC input (180~264VAC input for OWA-120E)
• No load power consumption <0.15W
• Energy efficiency Level VI
• E-Type: meet CoC Version 5 (OWA-60E/90E);
comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
• Class II design, without FG
• 2 pole USA plug (U type)/ EURO plug (E type)
• 5 years warranty
Model No.
Data Link
OWA-60U / OWA-60E / OWA-90U / OWA-90E /
OWA-120U  / OWA-120E
CEN Series
Wattage 60W~96W
Features • 90~295VAC input, built-in active PFC function
• Metal case, IP66 design for indoor or outdoor installations
• User adjustable output voltage and current level
• Suitable for LED street lighting and outdoor LED lighting
applications
Model No.
Data Link		 CEN-60 / CEN-75 / CEN-100
CLG Series
Wattage 60W~150W
Features • 90~295VAC input, built-in active PFC function
• Metal case, IP67/IP65 design for indoor or outdoor
installations
• Output current adjustable through output cable or internal
potentiometer (CLG-150)
• Suitable for LED street lighting, outdoor LED lighting
and moving sign applications
Model No.
Data Link		 CLG-60 / CLG-100 / CLG-150
ELG Series
Wattage 75W~240W
Features • 100~305VAC input range
• Built-in active PFC function
• No load power consumption <0.5W
• Protections:
Short circuit / Over current / Over voltage / Over temperature
• Cooling by free air convection
• Metal case, IP67/IP65 design for indoor or outdoor
installations
• Built-in 3 in 1 dimming function
(0~10Vdc or 10V PWM signal or resistance) for B-Type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty
Model No.
Data Link		 ELG-75  / ELG-100  / ELG-150 / ELG-200 / ELG-240
ELG-C Series
Wattage 75W~240W
Features • 100~305VAC input range
• Constant current (C.C.) output
• Built-in active PFC function
• No load power consumption <0.5W
• Protections:
Short circuit / Over voltage / Over temperature
• Metal case, IP67/IP65 design for indoor or outdoor
installations
• Built-in 3 in 1 dimming function
(0~10Vdc or 10V PWM signal or resistance) for B-Type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty
Model No.
Data Link		 ELG-75-C / ELG-100-C / ELG-150-C  /ELG-200-C / ELG-240-C
HLG Series

Wattage 40W~600W
Features • 90~305VAC input, built-in active PFC function
• 96% high efficiency
• Metal case, IP67/IP65 design for indoor or outdoor
installations
• Built-in 3 in 1 dimming function
(1~10VDC, PWM signal or resistance) for B type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries
• Suitable for LED street lighting, outdoor LED lighting
and general outdoor applications with high IP requirement
• IP68/-55℃ startup/10G vibration options available
(Please contact MEAN WELL for details)
• 7 years warranty
Model No.
Data Link		 HLG-40H / HLG-60H / HLG-80H / HLG-100H / HLG-120H /
HLG-150H / HLG-185H / HLG-240H / HLG-320H / HLG-600H
HLG-C Series
Wattage 70W~320W
Features • 90~305VAC input, built-in active PFC function
• Constant current output with high output voltage >60VDC
• Metal case, IP67/IP65 design for indoor or outdoor
installations
• Built-in 3 in 1 dimming function
(0 or 1~10VDC, PWM signal, or resistance) for B type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (HLG-240H-C/320H-C only)
• Suitable for LED street lighting and outdoor LED lighting
• 7 years warranty
Model No.
Data Link		 HLG-60H-C / HLG-80H-C / HLG-120H-C / HLG-185H-C /
HLG-240H-C  / HLG-320H-C
HVG(C) Series

Wattage 65W~320W
Features • Wide input range 180~528VAC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Built-in active PFC function
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (except for HVG-65 and
HVGC-65/100)
• Suitable for LED street lighting and outdoor LED lighting
applications
• 5 years warranty
Model No.
Data Link		 HVG-65 / HVG-100 / HVG-150/ HVG-240 / HVG-320
HVGC-65 / HVGC-100 / HVGC-150/ HVGC-240 / HVGC-320
HSG Series
Wattage 70W
Features • 90~305VAC input, built-in active PFC function
• Rectangular metal case
• IP65 design for indoor or outdoor installations
Model No.
Data Link		 HSG-70

 
FDL-65 Series
Wattage 65W
Features • 180~295VAC input range
• Built-in active PFC function
• Constant current design
• Fully encapsulated with IP65 level
• No load power consumption <0.5W
• 3 years warranty
Model No.
Data Link		 FDL-65
HBG Series
Wattage 60W~240W
Features • 90~305VAC input, built-in active PFC function
[90~295VAC for HBG-60(P)]
• Circular shape design:
HBG-60: plastic case, HBG-100/160/240: metal case
HBG-60P/100P/160P/240P:PCB type
• IP67/IP65 design for indoor or outdoor installations
for HBG-100/160/240
• Built-in 3 in 1 dimming function
(1~10VDC, PWM signal, or resistance) for
HBG-100(P)/160(P)/240(P) B type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (HBG-100/160 only)
• Suitable for LED high/low bay lighting, stage lighting
and spot lighting
• 5 years warranty
Model No.
Data Link		 HBG-60 / HBG-100 / HBG-160 / HBG-240
HBG-60P / HBG-100P  / HBG-160P  / HBG-240P
ULP-150
Wattage 150W
Features • 90~295VAC input, built-in active PFC function
• High efficiency up to 93%
• U-bracket low profile: 33mm, suitable for built-in LED lighting
systems
Model No.
Data Link		 ULP-150
AP Series
Wattage 8W~35W
Features • 90~264VAC input, 180~264VAC input for APV/APC-8E/12E/16E
• Rectangular plastic case with IP42 level
• Class II design, without FG
• Low cost, small and compact size
• Constant voltage mode for APV series
• Constant current mode for APC series
• Suitable for indoor LED lighting and moving sign applications
Model No.
Data Link		 APV-8  / APV-12 / APV-16 / APV-25 / APV-35 /
APV-8E  / APV-12E  / APV-16E 
APC-8  / APC-12 / APC-16 / APC-25 / APC-35/
APC-8E  / APC-12E  / APC-16E 
LP Series
Wattage 18W~150W
Features • 90~264VAC input [90~132VAC for LPL(C)-18,
180~264VAC for LPH(C)-18
• Slim plastic case with IP67 level
• Economical design
• Withstand 300VAC surge input for 5 seconds
(LPV/C-20/35/60/100)
• -30~70℃ wide operation range
• Suitable for economical LED lighting and moving sign
applications
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (LPVL-150 only)
Model No.
Data Link

LPL-18 / LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100/
LPV-150 / LPVL-150
LPHC-18 / LPLC-18 / LPC-20 / LPC-35 / LPC-60 /
LPC-100 / LPC-150
ELN Series
Wattage 30W~60W
Features • 90~264VAC input
• Fully isolated plastic case with IP64 level
• Optional dimming function: 1.1~10VDC(D type) or
PWM(P type) controlled
• Suitable for economical LED lighting and moving sign
applications
Model No.
Data Link		 ELN-30 / ELN-60
PCD Series
Wattage 16W~60W
Features • 16W/25W: 90~135VAC or 180~295VAC
40W/60W: 180~295VAC
• AC phase-cut dimming, work with leading and trailing edge
TRIAC dimmers
• Fully isolated plastic case with IP42 level
• Built-in active PFC function
• Class II design, without FG
• Constant current mode
• Suitable for indoor LED lighting
Model No.
Data Link		 PCD-16 / PCD-25 / PCD-40 / PCD-60
PLD Series
Wattage 16W~60W
Features • 16W: 90~135VAC or 180~295VAC
25W: 90~295VAC
40W/60W: 180~295VAC
• Built-in active PFC function
• Fully isolated plastic case with IP42 level
• Class II design, without FG
• Constant current mode
• Suitable for indoor LED lighting
Model No.
Data Link		 PLD-16 / PLD-25 / PLD-40 / PLD-60
GSC Series
Wattage 18W~40W
Features • 90~277VAC input, built-in active PFC function
• Constant current mode
• Fully isolated plastic case with IP40 design
• Class II design, without FG
• IEC320-C8 inlet for B type, 2 pole EURO plug for E type
• No load power consumption<0.15W
• Suitable for indoor LED lighting
Model No.
Data Link		 GSC18B / GSC18E / GSC25B /GSC25E / GSC40B / GSC40E
PLM Series
Wattage 12W~40W
Features • 110~295VAC input, 180~295VAC input for E type
• Built-in active PFC function
• Fully isolated plastic case with IP30 level
• Class II design, without FG
• Push terminal I/O
• Constant current mode
• No load power consumption<0.5W
• Suitable for indoor LED lighting
Model No.
Data Link		 PLM-12 / PLM-25 / PLM-40
PLM-12E / PLM-25E / PLM-40E
LPF Series
Wattage 16W~90W
Features • 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level (16W optional)
• Class II design, without FG
• Built-in 3 in 1 dimming function for D type
(1~10VDC, PWM signal or resistance)
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (LPF-90/90D)
• Suitable for LED lighting and moving sign applications
• 5 years warranty
Model No.
Data Link		 LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90
LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPF-90D
NPF Series
Wattage 40W~120W
Features • 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Class II design, without FG
• No load power consumption<0.15W (<0.5W for D type)
• Built-in 3 in 1 dimming function
(0~10VDC, PWM signal or resistance) for D type
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (NPF-40(D)/-60(D)/-120(D) only)
• Suitable for LED lighting and moving sign applications
• 5 years warranty
Model No.
Data Link		 NPF-40 / NPF-60 / NPF-90 / NPF-120
NPF-40D / NPF-60D / NPF-90D / NPF-120D
PWM Series
Wattage 40W~120W
Features • 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Constant voltage PWM style output
• Class II design, without FG
• No load power consumption<0.5W
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal
or resistance)
• Type «HL» LED drivers for use in Class I, Division 2 hazardous
(Classified) location luminaries (PWM-40/60/120 only)
• Suitable for LED strip lighting
• 5 years warranty
Model No.
Data Link		 PWM-40 / PWM-60 / PWM-90 / PWM-120
PLC Series
Wattage 30W~96W
Features • 90~264VAC input, built-in active PFC function
• Fully isolated plastic case with screw terminal style of I/O
• Suitable for indoor LED lighting and moving sign applications
Model No.
Data Link		 PLC-30 / PLC-45 / PLC-60 / PLC-100
PLN Series
Wattage 20W~96W
Features • 90~295VAC input (90~277VAC for PLN-20),
built-in active PFC function
• Fully isolated plastic case with IP64 level
• Suitable for indoor LED lighting and moving sign applications
Model No.
Data Link		 PLN-20 / PLN-30 / PLN-45 / PLN-60 / PLN-100
HLN Series
Wattage 40W~80W
Features • 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP64 level
• Built-in 3 in 1 dimming function
(1~10VDC, PWM signal or resistance) for B type
• User adjustable output voltage and current level for A type
• Suitable for indoor LED lighting and moving sign applications
Model No.
Data Link		 HLN-40H / HLN-60H / HLN-80H
LCM Series

Wattage 25W~60W
Features • 180~277VAC input for LCM-25(DA)
180~295VAC input for LCM-40(DA)/60(DA)
90~132VAC input only for LCM-40U(DA)/60U(DA)
• Built-in active PFC function
• Fully isolated plastic case
• Multiple-stage C.C. level selectable by DIP Switch
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance)
for LCM-25/40/40U/60/60U
• Built-in DALI interface and push dimming function for
LCM-25DA/40DA/40UDA/60DA/60UDA
• Built-in EnOcean wireless technology interface
for LCM-40EO/60EO/40UEO/60UEO
• Suitable for indoor LED lighting applications
Model No.
Data Link		 LCM-25 / LCM-40 / LCM-60
LCM-25DA / LCM-40DA / LCM-60DA
LCM-40U /  LCM-60U
LCM-40UDA /LCM-60UDA
LCM-40EO /  LCM-60EO
LCM-40UEO /LCM-60UEO
IDLC Series
Wattage 45W~65W
Features • Built-in active PFC function
• Constant current output mode
• Flicker free design
• Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
• Suitable for indoor LED lighting applications
Model No.
Data Link		 IDLC-45/ IDLC-65
PLP Series
Wattage 20W~60W
Features • 90~264VAC input (90~277VAC for PLP-20), built-in active
PFC function
• Suitable for built-in LED lighting systems
Model No.
Data Link		 PLP-20 / PLP-30 / PLP-45 / PLP-60
IDPC Series
Wattage 45W~65W
Features • Built-in active PFC function
• Constant current output mode
• Flicker free design
• Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
• Suitable for built-in LED lighting systems
Model No.
Data Link		 IDPC-45/ IDPC-65
HLP Series
Wattage 40W~80W
Features • 90~305VAC input, built-in active PFC function
• Built-in 3 in 1 dimming function
(1~10VDC, PWM signal or resistance)
• Suitable for built-in LED lighting systems
Model No.
Data Link		 HLP-40H / HLP-60H / HLP-80H
LDD Series
Output Current 300 / 350 / 500 / 600 / 700 / 1000 / 1200 / 1500mA
Features • Constant current output DC/DC step-down LED driver
• High efficiency up to 97%
• Comply with EN55015 and FCC without additional any
components
• LDD-H/HW/HS & LDD-300~700L/LW/LS:
PWM dimming and remote control
LDD-1000~1500L/LW/LS:
PWM + analog dimming and remote ON/OFF control
• Suitable for built-in LED lighting systems
(additional mother board is required)
• Pin, wire and SMD style for choice
Model No.
Data Link		 LDD-H/ LDD-HW / LDD-HS / LDD-L / LDD-LW / LDD-LS
LDB-L/LW Series
Output Current 300 / 350 / 500 / 600mA
Features • Constant current DC/DC buck-boost LED driver
• High efficiency up to 91%
• Comply with EN55015 and FCC part 15 without additional input
filter and capacitors
• PWM dimming and remote ON/OFF control
• Suitable for buck-boost type lighting systems
(additional mother board is required)
• Pin, wire style for choice
Model No.
Data Link		 LDB-L / LDB-LW
LDH Series
Output Current 350 / 500 / 700 / 1050mA
Features • Constant current output DC/DC step-up LED driver
• High efficiency up to 95%
• Comply with EN55015 without additional any components
• PWM+analog dimming and remote ON/OFF control
• Suitable for boost type lighting systems
(Additional mother board is required)
• Pin, wire style for choice
Model No.
Data Link		 LDH-45
DAP-04
Features

• 90~305VAC input
• Convert DALI signal to PWM signal
• 4 DALI addressable output channels
• Meet DALI standards(IEC62386-101,102,207)
• Suitable to use along with MEAN WELL’s AC/DC LED PSU with
3 in 1 dimming function
Model No.
Data Link		 DAP-04
SDP-001
Features

• Smart timer dimming programmer
Model No.
Data Link		 SDP-001
SPD-20
Features • 20kA surge protection device
• Type 2 component assemblies
• Line to Ground & Line to Line protected
• Suitable for surge protection of LED drivers
• UL1449, TUV EN61643-11 approved
Model No.
Data Link		 SPD-20
WPD-06
Features • EnOcean wireless  control technology
• Easy installation and  configuration
• 6 protected and independent dimming output channels
• Up to 128 wireless batteryless switches
• Suitable for constant voltage lighting  application
• Up to 30 meter wireless distances
Model No.
Data Link		 WPD-06
iTouch
Features • RF/WiFi/IR Remote control
• Free iOS /Android  APP download and  big data accessibility
• Smart scenes for Home Automation and Lighting Control
Systems
• Easy installation and configuration
• Energy saving and monitoring
Model No.
Data Link		 iTouch
PIR-045
Features • Built-in Passive Infrared  sensor module
• MCU controller, no relay contact
• Adjustable off-time delay / dimming level / sensitivity
Model No.
Data Link		 PIR-045
RFP series
Features • RF wireless remote control
• Adjustable brightness / color temperature / RGBW
• Suitable for LED strips application
Model No.
Data Link		 RFP-M1M3-3A / RFP-M2M3-3A / RFP-M5M3-3A /
RFP-M8M4-5A
LED Strips
Features • 12V LED Strips
• Uniform brightness, high stability
• Tailored length per application demand
Model No.
Data Link		 NCL-CL1-01 / IRL-CL2-01/ IRL-RGBW-01/
IRL-RGB-01
POB-30 series
Features • AC mains direct driving
• Systematic efficacy >100 lm/w @3000K
• CRI>80 ; PF> 0.95 ‧T.H.D. <20%
• Easy installation and configuration
Model No.
Data Link		 POB-30
AC/DC   DIN Rail Power Supply TOP
MDR series
Wattage 10W~96W
Features • No load power consumption<0.75W (1W for MDR-100)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in active PFC and over temperature protection (MDR-100)
• DC OK signal output (MDR-10/20)
• DC OK relay contact (MDR-40/60/100)
• Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
Model No.
Data Link		 MDR-10 / MDR-20 / MDR-40 / MDR-60 / MDR-100
DRA series
Wattage 40W~60W
Features • Io can be adjusted 10~100% by 1~10VDC, PWM signal or
resistance
• Assemble on industrial rail TS-35 / 7.5 or 15
• Suitable for machine vision inspection system and plant
cultivation applications
Model No.
Data Link		 DRA-40 / DRA-60
Class II Type / Step Shape
Wattage 15W~100W
Features • Isolation class II
• No load power consumption <0.5W (DR-15)
• No load power consumption <1W (DR-100)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Suitable for building automation and control of household
appliance
Model No.
Data Link		 DR-15 / DR-30 / DR-60 / DR-100
General Type — Single Phase
Wattage 45W~480W
Features • Fanless design
• Models over 240W(includes) built-in PFC function
Model No.
Data Link
 DR-45 / DR-75 / DR-120 / DRP-240 / DRP-480 / DRP-480S
General Type — Three Phase or High Input Range
Wattage 120W~960W
Features • Fanless design
• Three phase or high input voltage range (340~550VAC)
Model No.
Data Link
 DRH-120 / DRT-240 / DRT-480 / DRT-960
EDR series — Slim Single Phase
Wattage 75W~150W
Features • Model width: 75W: 32mm
120W/150W: 40mm
• EMC standards: EN55022 class A
• Low cost and slim design
• Assemble on industrial rail TS-35 / 7.5 or 15
• 2 years warranty
Model No.
Data Link
 EDR-75 / EDR-120 / EDR-150
NDR series — Slim Single Phase
Wattage 75W~480W
Features • Model width: 75W: 32mm
120W/150W: 40mm
240W: 63mm
480W: 85.5mm
• EMC standards: EN55022 class B
• Economical and slim design
• Assemble on industrial rail TS-35 / 7.5 or 15
• 3 years warranty
Model No.
Data Link
 NDR-75 / NDR-120 / NDR-240 / NDR-480
SDR Series – Slim Single Phase
Wattage 75W~960W
Features • Slim design and high efficiency up to 94%
• Built-in active PFC function (except for SDR-75)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact (except for SDR-75)
• 150% peak load capability (130% for SDR-960)
Model No.
Data Link
 SDR-75 / SDR-120 / SDR-240 / SDR-480 / SDR-480P /
SDR-960
TDR Series – Slim Three Phase
Wattage 960W
Features • Slim design and 340~550VAC high input range (three phase)
• High efficiency up to 94.5%
• Built-in active PFC function
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact
Model No.
Data Link
 TDR-960
WDR Series – Slim Wide Input Range
Wattage 120W~480W
Features • Slim design and 180~550VAC wide input range
(single and two phase)
• High efficiency up to 93%
• Built-in active PFC function (240W & 480W)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact
Model No.
Data Link
 WDR-120 / WDR-240 / WDR-480
KNX-20E-640 – KNX Power Supply
Wattage 20W
Features • EIB/KNX power supply with integrated choke Ÿ
• Compact size with 3SU (52.5mm) width Ÿ
• 180~264VAC input Ÿ
• No load power consumption <0.5W Ÿ
• Isolation Class I Ÿ
• Assemble on industrial rail TS-35 / 7.5 or 15
Model No.
Data Link
 KNX-20E-640
Peripheral
Features • 20A redundant module & 40A DC UPS module
Model No.
Data Link
 DR-RDN20 / DR-UPS40
 Modular Series TOP
Wattage 450W~1000W
Features • Free configuration, highly flexible, customized standard PSU
• Cover all output voltages from 1.6~53VDC
• Built-in active PFC
• Suitable for multi-output, complex equipment or systems
Model No.
Data Link		 MP450 / MP650 / MP1K0
MS-75 / MS-150 / MS-210 / MS-300 / MS-360 / MD-100
 19″ Rack Power TOP
Wattage 1000W~24000W
Features • 1U rack mountable front end rectifier:
1000W / 1600W / 2000W
• 1U 19″ rack shelf (RCP-1U / RHP-1U / RKP-1U)
• RCP-MU / RKP-CMU1: Control and monitoring unit
(Built-in I2C / PMBus decoder)
Model No.
Data Link		 RCP-1000 / RCP-1600 / RCP-2000
RCP-1U / RHP-1U / RKP-1U
RCP-MU / RKP-1U-CMU1 / RKP-CMU1
 Specific Purpose TOP
Security Series — PCB Type
Wattage 35W~160W
Features • With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Built-in active PFC function (PSC-160)
• Case available
Model No.
Data Link		 PSC-35 / PSC-60 / PSC-100 / PSC-160
Security Series — Enclosed Type
Wattage 35W~155W
Features • With UPS function (need external batteries) for AD/ADD series
• Suitable for security industry or battery backup systems
Model No.
Data Link		 SCP-35 / SCP-50 / SCP-75
ADS-55 / ADS-155
AD-55 / AD-155
ADD-55 / ADD-155
Security Series — DIN Rail Type
Wattage 40W~100W
Features • With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Assemble on industrial rail TS-35 / 7.5 or 15
Model No.
Data Link		 DRC-40 / DRC-60 / DRC-100
ATX PC Power
Wattage 250W~300W
Features • Low profile for 1U/2U for rack system
• Suitable for industrial PC applications
Model No.
Data Link		 IPC-250 / IPC-300
  Open Frame Switching Power Supply TOP
On Board Type
Wattage 1W~60W
Features • Assemble on the main PCB of the system
• Medical safety approved (2xMOPP) for PM and NFM series
• Suitable for BF application with appropriate system
consideration for PM and NFM series
• Industrial safety approved for IRM series
• No load power consumption<0.075W~0.1W for IRM series
• NFM – PCB type ; PM – encapsulated type
IRM – miniature encapsulated type, screw terminal I/O
connection models for ST type
Model No.
Data Link		 PM-05 / PM-10 / PM-15 / PM-20
NFM-05 / NFM-10 / NFM-15 / NFM-20
IRM-01 / IRM-02 / IRM-03 / IRM-05 / IRM-10 /
IRM-15 / IRM-20 / IRM-30 / IRM-45 / IRM-60
General PCB Type
Wattage 5W~250W
Features • PCB type, non-PFC for small wattage models
• Multiple form factors for different installations:
7”* 4.25”, 5”* 3”, 4”* 2”, slim type
Model No.
Data Link
 Single

PS-05 / PS-15 / PS-25 / PS-35 / PS-45 / PS-65
PPS-125 / ASP-150 / PPS-200
LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150
Dual PD-25 / PD-45 / PD-65 / RPD-65 / PD-110 / PID-250
Triple PT-45 / PT-65 / PT-4503 / PT-6503 / RPT-65 / PPT-125
Quad PQ-100 / PPQ-100 / PPQ-1003
Green PCB Type
Wattage 15W~400W
Features • Compact size, 3″ x 2″ for EPS-45S/65S; 4″ x 2″ for EPS-120/EPP-200;
5″x3″ for EPP-300/400
• Compact PCB type, non-PFC for small wattage models
(15W~65W)
• No load power consumption <0.3W~0.5W
• Suitable for ErP regulated end systems
Model No.
Data Link

EPS-15 / EPS-25 / EPS-35 / EPS-45 / EPS-45S  /
EPS-65 / EPS-65S  / ELP-75 / EPS-120
EPP-100 / EPP-150 / EPP-200/ EPP-300 / EPP-400
Medical PCB Type
Wattage 30W~400W
Features • Compact size, 3″x2″ for RPS-30/45/65; 4″x2″ for RPS-120/200;
5″x3″ for RPS-300/400
• PCB type, non-PFC for small wattage models
• Medical safety approved (2xMOPP)
• Low leakage current
• Suitable for BF application with appropriate system
consideration for selected models
Model No.
Data Link
 Single MPS-30 / MPS-45 / MPS-65 / MPS-200 /
RPS-30 /RPS-45 /RPS-65 / RPS-120 / RPS-200 / RPS-400
RPS-60 / RPS-75 / RPS-160 / RPS-300 / RPS-300-C
Dual MPD-45 / MPD-65 / MPD-200
RPD-60 / RPD-75 / RPD-160
Triple MPT-45 / MPT-65 / MPT-200
RPT-60 / RPT-75 / RPT-160
Quad MPQ-200
  External Switching Power Supply TOP
Charger
Wattage 30W~1000W
Features • CE declaration only for models with active or passive PFC if
higher than 150W
• Fanless design for PB-300, HEP-600C, GC series
• No load power consumption<1W for GC series
(<0.5W for GC120 and HEP-600C)
• Intelligent enclosed type charger with curve programmable
via PMBus, or by external voltage control for RPB-1600 l
• Intelligent 1U rack mountable front end charger with curve
programmable via PMBus, or by external voltage control for
RCB-1600
• Suitable for battery back up system, electrical wheelchair,
electrical scooter, trailer, or general consumer electronic
products
• Suitable for general industrial applications in harsh
environment (HEP-600C)
Model No.
Data Link
 Stationary PB-300 / PB-360 / PB-360P / PB-600 / PB-1000
ESC-120 / ESP-120 / ESC-240 / ESP-240
HEP-600C
RPB-1600 / RCB-1600
Portable PA-120 / PB-120 / PB-230
GC30B / GC30U / GC30E / GC120 / GC160 / GC220 / GC330
Industrial Desktop Adaptor — Level V
Wattage 18W~280W
Features • Energy efficiency level V (GS series)
• No load power consumption <0.3W~0.5W
• Comply with EISA 2007, NRCan, MEPS and ErP
• Fanless design with 0~50oC working temperature
• A type: Class I (with FG), equipped IEC320-C14;
B type: Class II (without FG), equipped IEC320-C8
• DC plug changeable (MOQ may be required)
• 2 years warranty
Model No.
Data Link
 Single GS18A / GS18B / GS25A / GS25B / GS40 /
GS60 / GS90 / GS120 / GS160 / GS220 / GS280
Triple P25A / P25B / P50A
  Industrial Desktop Adaptor — Level VI
Wattage 15W~280W
Features • Energy efficiency Level VI
• No load power consumption <0.075W~0.5W
• Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC
Version 5
• Fanless design with -30~+70oC working temperature
• A type: Class I (with FG), equipped IEC320-C14
B type: Class II (without FG), equipped IEC320-C8
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model No.
Data Link
 Single GS15A / GS15B / GST18A / GST18B / GST25A / GST25B /
GST36B / GST40A / GST60A / GST90A / GST120A /
GST160A / GST220A / GST280A
Triple GP25A / GP25B / GP50A
Industrial Wall-mounted Adaptor — Level V
Wattage 12W~36W
Features • Energy efficiency Level V
• No load power consumption <0.3W~0.5W
• Comply with EISA 2007, NRCan, MEPS and ErP
• 0~50oC working temperature
• 2 pole USA (U type) / EURO (E type) for GS series
• DC plug changeable (MOQ may be required)
• 2 years warranty
Model No.
Data Link
 GS12U / GS12E / GS18U / GS18E / GS25U / GS25E / GS36U /
GS36E
  Industrial Wall-mounted Adaptor — Level VI
Wattage 5W~60W
Features • Energy efficiency Level VI
• No load power consumption <0.075W~0.15W
• Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
• -30~+70oC working temperature
• 2 pole USA plug(U type) / EURO plug(E type) /
Interchangeable type for GE series
• Slim design for SGA series
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model No.
Data Link
 Fixed GS05U-USB / GS05E-USB / GS06U / GS06E / GS15U / GS15E /GST18U / GST18E / GST25U / GST25E / GST36U / GST36E
Slim SGA12U/ SGA12E/ SGA18U/ SGA18E/ SGA25U/ SGA25E/
SGA40U / SGA40E / SGA60U / SGA60E
Inter-changeable GE12 / GE18 / GE24 / GE30
Medical Adaptor — Desktop
Wattage 18W~220W
Features • Medical safety approved (2xMOPP), suitable for BF application
with appropriate system consideration (B type)
• Energy efficiency Level VI
(GSM06/18/25/36/40/60 5~9V: Level V)
• No load power consumption <0.1W~0.15W
• Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
• A type: Class I (with FG), equipped IEC320-C14;
B type: Class II (without FG), equipped IEC320-C8
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model No.
Data Link		 GSM18B / GSM25B / GSM36B / GSM40A / GSM40B /
GSM60A / GSM60B /GSM90A / GSM90B  / GSM120A /GSM120B / GSM160A / GSM160B / GSM220A / GSM220B
Medical Adaptor — Wall-mounted
Wattage 6W~40W
Features • Medical safety approved (2xMOPP), suitable for BF
applications with appropriate system consideration
• Energy efficiency Level VI (GSM06 and GSM18/25/36 5~9V for
Level V)
• No load power consumption <0.075W~0.3W
• Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC
Version 5
• 2 pole USA plug(U type)/EURO plug(E type) for GSM series,
interchangeable type for GEM series
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model No.
Data Link		 Fixed GSM06U / GSM06E / GSM18U / GSM18E / GSM25U / GSM25E /GSM36U / GSM36E
Inter-changeable GEM18I / GEM30I / GEM40I
Moistureproof Adaptor — Desktop

Wattage 60W~120W
Features

• IP67 design for power body
• 90~264VAC input (180~264VAC input for OWA-120E)
• No load power consumption <0.15W
• Energy efficiency Level VI
• E-Type: meet CoC Version 5 (OWA-60E/90E);
comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
• Class II design, without FG
• 2 pole USA plug (U type)/EURO plug (E type)
• 5 years warranty
Model No.
Data Link
OWA-60U / OWA-60E / OWA-90U / OWA-90E /
OWA-120U  / OWA-120E
DC/DC   DC/DC Converter TOP
Module Type
Wattage 0.5W~150W
Features • On board module type, assemble on the main PCB of the
system
• Single, dual, triple output models
Model No.
Data Link
 Single SRS / SUS01 / SPR01 / SMU01 / SMA01 / SBT01 / SFT01 /
SPA01 / SPA02 / SMU02 / SPU02 /  SPU03 / SPB03 /
SPB05 / SCW03 / SCW05 / SLW05 / SCW08 / SKE10 / SCW12 /
SKE15 / SKA15 / SKM15 / SKA20 /
SKM30 / SDM30 / SKA40 / SKM50 / SKA60
Dual DET01 / DCW03 / DCW05 / DLW05 / DCW08 / DKE10 / DCW12 /
DKE15 / DKA15 / DKA30
Triple TKA30
Half-
Brick		 MHB75 / MHB100 / MHB150
On Board Type
Wattage 5W~60W
Features • On board PCB type, assemble on the main PCB of the system
• Ultra-low profile
• 3:1 ~ 4:1 wide input range
• Non-isolated for NID series
Model No.
Data Link		 NSD05 / NSD10-S / NSD10-D / NSD15-S / NSD15-D /
NID30 / NID60
PCB Type
Wattage 5W~45W
Features • 2:1 wide input range
• CE declaration
• Built-in systems and low cost
Model No.
Data Link		 PSD-05 / PSD-15 / PSD-30 / PSD-45
Enclosed Type
Wattage 15W~1000W
Features • DC/DC converter with metal chassis
• Comply with EN50155 railway certificate for RSD family
• CE declaration
• Suitable for battery backup system or transportation vehicle
Model No.
Data Link		 SD-15 / SD-25 / SD-50 / SD-100 /SD-150 / SD-200 / SD-350 /
SD-500 / SD-1000
RSD-100 / RSD-150 / RSD-200 / RSD-300
DC/AC   Off-Grid DC/AC Power Inverter TOP
Modified Sine Wave
Wattage 100W~2500W
Features • Modified sine wave output, suitable for resistive load
• Low cost
• 1 year warranty
Model No.
Data Link
 A301/302-100 / A301/302-150 / A301/302-300 /
A301/302-600 / A301/302-1K0 / A301/302-1K7 /
A301/302-2K5
True Sine Wave
Wattage 200W~3000W
Features • True sine wave output, suitable for motor related applications
• High surge power up to 200%
• Output voltage / frequency adjustable
• Conformal coating (except for TS-200/400)
• 3 years warranty
Model No.
Data Link		 TS-200 / TS-400 / TS-700 / TS-1000 / TS-1500 / TS-3000
Features • True sine wave with solar charger & by-pass function
• High surge power up to 200%
• Output voltage / frequency adjustable
• Conformal coating (except for TS-200/400)
• Computer-based monitoring software,
recommended for Windows 7 and Windows 8 Operating System
(English and Chinese version)
• 3 years warranty
Model No.
Data Link		 TN-1500 / TN-3000
Features • Remote controller for TS-700~3000 , TN-1500~3000
Model No.
Data Link		 IRC1 / IRC2 / IRC3
Solar Inverter – with MPPT function
Wattage 500W
Features • ISI-500: Modified sine wave with MPPT solar charger
• ISI-501: True sine wave with MPPT solar charger
• High surge power up to 200%
• 2 years warranty for ISI-500 series;
3 years warranty for ISI-501 series
Model No.
Data Link		 ISI-500 / ISI-501
DC/AC   Accessories TOP
DIN Rail Accessories
Order No. DRL-01
Case 903, 905, 931, 932, 971
Data Link
 DRL-01
Order No. DRL-02
Case 901, 902, 906, 915, 916, 920
Data Link
 DRL-02
Order No. DRL-03A
Case 980, 987
Data Link
 DRL-03A
Order No. DRP-01
Case 901, 902, 903, 906, 931, 932, 946
Data Link
 DRP-01
Order No. DRP-01A
Case 203, 205, 978, 999
Data Link
 DRP-01A
Order No. DRP-02
Case 905, 915, 916, 920, 928
Data Link
 DRP-02
Order No. DRP-03
Case DRP-01, DRL-01~03
Data Link
 DRP-03
Order No. DRP-04
Case 203, 205, 978, 999
Data Link
 DRP-04
Mounting Accessories
Order No. MHS012
Case 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995
Data Link
 MHS012
Order No. MHS013
Case 919, 926
Data Link
 MHS013
Order No. MHS014
Case 212, 952
Data Link
 MHS014
Order No. MHS025
Case 910
Data Link
 MHS025
Order No. MHS026
Case 943
Data Link
 MHS026
Order No. MHS027
Case 971, 931
Data Link
 MHS027